Dears,

Very strange as it looks, I am trying to upgrade a media server appliance from 2.5.3 to 2.6.0.2 and it fails. In the logs I can see following --

Checking for required system conditions...

ok nbdb_ntfs_dir_symlink: inapplicable on linux: skipping
not ok remote_emm: Remote EMM configuration is detected.
  Master Server is JUM-NBU-5230B;
  EMM Server is jum-bkup-05.
  As of NetBackup 7.6, Symantec no longer supports NetBackup
  configurations in which the Master Server and the EMM Server are on
  different hosts.  See
 
      https://www.symantec.com/docs/TECH206478
 
  for more information.
 

Its says master server is JUM-NBU-5230B(The media Appliance I am upgrading) where it is NOT !!!!!!

Here is the bp.conf

JUM-NBU-5230B:/log/patch_log_2.6.0.2_060514122421_ROLLBACK/logs # cat /usr/openv/netbackup/bp.conf
SERVER = jum-bkup-05
SERVER = jum-bkup-n1
SERVER = JUM-BKUP-05.DXB.JI.NET
SERVER = jum-bkup-n2
SERVER = jum-nbu-5230b
SERVER = mea-cas-array1
CLIENT_NAME = jum-nbu-5230b
USE_VXSS = PROHIBITED
VXSS_SERVICE_TYPE = INTEGRITYANDCONFIDENTIALITY
EMMSERVER = jum-bkup-05
VXDBMS_NB_DATA = /usr/openv/db/data
VERBOSE = 5
PREFERRED_NETWORK = 192.168.229.0/24 MATCH 10.90.6.201
NETBACKUP_APPLIANCE_MODE = MEDIA_SERVER
IP_ADDRESS_FAMILY = AF_INET
CLIENT_READ_TIMEOUT = 18000
CLIENT_CONNECT_TIMEOUT = 300
SERVER_CONNECT_TIMEOUT = 300
DISABLE_AUTO_NAT = YES
BPDBM_VERBOSE = -1
BPRD_VERBOSE = -1
BPBRM_VERBOSE = -1
BPTM_VERBOSE = 0
BPDM_VERBOSE = -1
VAULT_VERBOSE = 0
BPJOBD_VERBOSE = -1
TELEMETRY_UPLOAD = YES
 

=================================================

Here is nbemmcmd -listhosts -verbose

JUM-NBU-5230B:/home/maintenance # /usr/openv/netbackup/bin/admincmd/nbemmcmd -listhosts -verbose
NBEMMCMD, Version: 7.5.0.6
The following hosts were found:
jum-bkup-n1
        ClusterName = "JUM-BKUP-05"
        MachineName = "jum-bkup-n1"
        FQName = "jum-bkup-n1.dxb.ji.net"
        GlobalDriveSeed = "VEND:#.:PROD:#.:IDX"
        LocalDriveSeed = ""
        MachineDescription = ""
        MachineFlags = 0x17
        MachineNbuType = master (3)
        MachineState = active for disk jobs (12)
        NetBackupVersion = 7.6.0.2 (760200)
        OperatingSystem = windows (11)
        ScanAbility = 5
jum-bkup-n2
        ClusterName = "JUM-BKUP-05"
        MachineName = "jum-bkup-n2"
        FQName = "jum-bkup-n2.dxb.ji.net"
        GlobalDriveSeed = "VEND:#.:PROD:#.:IDX"
        LocalDriveSeed = ""
        MachineDescription = ""
        MachineFlags = 0x17
        MachineNbuType = master (3)
        MachineState = active for disk jobs (12)
        NetBackupVersion = 7.6.0.2 (760200)
        OperatingSystem = windows (11)
        ScanAbility = 5
jum-bkup-05
        MachineName = "jum-bkup-05"
        FQName = "jum-bkup-05.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = server (6)
jum-sql-cl1
        MachineName = "jum-sql-cl1"
        FQName = "jum-sql-cl1.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = app_cluster (7)
        NetBackupVersion = 0.0.0.0 (0)
        Active Node Name = "jum-sqlcl1-n2.dxb.ji.net"
jum-crm-sql
        MachineName = "jum-crm-sql"
        FQName = "jum-crm-sql.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = app_cluster (7)
        NetBackupVersion = 0.0.0.0 (0)
        Active Node Name = "jum-crm-dbn1.dxb.ji.net"
jum-sundb-01
        MachineName = "jum-sundb-01"
        FQName = "jum-sundb-01.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = app_cluster (7)
        NetBackupVersion = 0.0.0.0 (0)
        Active Node Name = "jum-sundb-n1.dxb.ji.net"
mea-moss-sqlvs1
        MachineName = "mea-moss-sqlvs1"
        FQName = "mea-moss-sqlvs1.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = app_cluster (7)
        NetBackupVersion = 0.0.0.0 (0)
        Active Node Name = "mea-moss-dbn1.dxb.ji.net"
mea-moss-sqlvs2
        MachineName = "mea-moss-sqlvs2"
        FQName = "mea-moss-sqlvs2.DXB.JI.NET"
        MachineDescription = ""
        MachineNbuType = app_cluster (7)
        NetBackupVersion = 0.0.0.0 (0)
        Active Node Name = "mea-moss-dbn2.dxb.ji.net"
jum-nbu-5230b
        MachineName = "jum-nbu-5230b"
        FQName = "JUM-NBU-5230B.DXB.JI.NET"
        MachineDescription = "PureDisk"
        MachineFlags = 0x2
        MachineNbuType = ndmp (2) (storage_server)
jum-nbu-5230a
        MachineName = "jum-nbu-5230a"
        FQName = "JUM-NBU-5230A.DXB.JI.NET"
        MachineDescription = "PureDisk"
        MachineFlags = 0x2
        MachineNbuType = ndmp (2) (storage_server)
cephvh2q0903j1k.dxb.ji.net
        MachineName = "cephvh2q0903j1k.dxb.ji.net"
        FQName = "cephvh2q0903j1k.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
mea-mbx-n3.dxb.ji.net
        MachineName = "mea-mbx-n3.dxb.ji.net"
        FQName = "mea-mbx-n3.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
mea-mbx-n4.dxb.ji.net
        MachineName = "mea-mbx-n4.dxb.ji.net"
        FQName = "mea-mbx-n4.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
10.90.6.155
        MachineName = "10.90.6.155"
        FQName = "10.90.6.155"
        MachineDescription = ""
        MachineNbuType = client (8)
cephvh2q0902j1k.dxb.ji.net
        MachineName = "cephvh2q0902j1k.dxb.ji.net"
        FQName = "cephvh2q0902j1k.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
cephvh2q0904j1k.dxb.ji.net
        MachineName = "cephvh2q0904j1k.dxb.ji.net"
        FQName = "cephvh2q0904j1k.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
cephvh2q0901j1k.dxb.ji.net
        MachineName = "cephvh2q0901j1k.dxb.ji.net"
        FQName = "cephvh2q0901j1k.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
mea-mbx-n1.dxb.ji.net
        MachineName = "mea-mbx-n1.dxb.ji.net"
        FQName = "mea-mbx-n1.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
mea-mbx-n2.dxb.ji.net
        MachineName = "mea-mbx-n2.dxb.ji.net"
        FQName = "mea-mbx-n2.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
XEVAAL2Q0102J1D
        MachineName = "XEVAAL2Q0102J1D"
        FQName = "XEVAAL2Q0102J1D.DXB.JI.NET"
        MachineDescription = ""
        MachineNbuType = client (8)
XEVAAL2Q0103J1D
        MachineName = "XEVAAL2Q0103J1D"
        FQName = "xevaal2q0103j1d.DXB.JI.NET"
        MachineDescription = ""
        MachineNbuType = client (8)
jum-crm-dbn1.dxb.ji.net
        MachineName = "jum-crm-dbn1.dxb.ji.net"
        FQName = "jum-crm-dbn1.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
jum-crm-dbn2.dxb.ji.net
        MachineName = "jum-crm-dbn2.dxb.ji.net"
        FQName = "jum-crm-dbn2.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
jum-sundb-02
        MachineName = "jum-sundb-02"
        FQName = "jum-sundb-02.DXB.JI.NET"
        MachineDescription = ""
        MachineNbuType = app_cluster (7)
        NetBackupVersion = 0.0.0.0 (0)
        Active Node Name = "jum-sundb-n2.dxb.ji.net"
jum-sundb-n2.dxb.ji.net
        MachineName = "jum-sundb-n2.dxb.ji.net"
        FQName = "jum-sundb-n2.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
jum-sundb-n1.dxb.ji.net
        MachineName = "jum-sundb-n1.dxb.ji.net"
        FQName = "jum-sundb-n1.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
jum-sqlcl1-n2.dxb.ji.net
        MachineName = "jum-sqlcl1-n2.dxb.ji.net"
        FQName = "jum-sqlcl1-n2.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
jum-sqlcl1-n1.dxb.ji.net
        MachineName = "jum-sqlcl1-n1.dxb.ji.net"
        FQName = "jum-sqlcl1-n1.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
jum-sql-cl2
        MachineName = "jum-sql-cl2"
        FQName = "jum-sql-cl2.DXB.JI.NET"
        MachineDescription = ""
        MachineNbuType = app_cluster (7)
        NetBackupVersion = 0.0.0.0 (0)
        Active Node Name = "jum-sqlcl1-n2.dxb.ji.net"
mea-moss-dbn1.dxb.ji.net
        MachineName = "mea-moss-dbn1.dxb.ji.net"
        FQName = "mea-moss-dbn1.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
mea-moss-dbn2.dxb.ji.net
        MachineName = "mea-moss-dbn2.dxb.ji.net"
        FQName = "mea-moss-dbn2.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
jum-bkup-04
        MachineName = "jum-bkup-04"
        FQName = "jum-bkup-04.DXB.JI.NET"
        MachineDescription = "PureDisk"
        MachineFlags = 0x2
        MachineNbuType = ndmp (2) (storage_server)
nbu-5230-temp
        MachineName = "nbu-5230-temp"
        FQName = "nbu-5230-temp.DXB.JI.NET"
        MachineDescription = "PureDisk"
        MachineFlags = 0x2
        MachineNbuType = ndmp (2) (storage_server)
jum-nbu-test
        MachineName = "jum-nbu-test"
        FQName = "jum-nbu-test.DXB.JI.NET"
        MachineDescription = "PureDisk"
        MachineFlags = 0x2
        MachineNbuType = ndmp (2) (storage_server)
gepsri2q0964j1c
        MachineName = "gepsri2q0964j1c"
        FQName = "gepsri2q0964j1c.DXB.JI.NET"
        MachineDescription = ""
        MachineNbuType = client (8)
gepsri2q0961j1d
        MachineName = "gepsri2q0961j1d"
        FQName = "gepsri2q0961j1d.DXB.JI.NET"
        MachineDescription = ""
        MachineNbuType = client (8)
mea-opmsdb-03.dxb.ji.net
        MachineName = "mea-opmsdb-03.dxb.ji.net"
        FQName = "mea-opmsdb-03.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
mea-opmsdb-02.dxb.ji.net
        MachineName = "mea-opmsdb-02.dxb.ji.net"
        FQName = "mea-opmsdb-02.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
mea-opmsdb-01.dxb.ji.net
        MachineName = "mea-opmsdb-01.dxb.ji.net"
        FQName = "mea-opmsdb-01.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = client (8)
JUM-BKUP-05
        MachineName = "JUM-BKUP-05"
        FQName = "jum-bkup-05.dxb.ji.net"
        MachineDescription = ""
        MachineNbuType = cluster (5)
        NetBackupVersion = 7.6.0.2 (760200)
        Active Node Name = "jum-bkup-n1"
jum-nbu-5230b
        ClusterName = ""
        MachineName = "jum-nbu-5230b"
        FQName = "JUM-NBU-5230B.DXB.JI.NET"
        LocalDriveSeed = ""
        MachineDescription = ""
        MachineFlags = 0x77
        MachineNbuType = media (1)
        MachineState = active for tape and disk jobs (14)
        MasterServerName = "JUM-BKUP-05"
        NetBackupVersion = 7.5.0.6 (750600)
        OperatingSystem = linux (16)
        ScanAbility = 5
jum-nbu-5230a
        ClusterName = ""
        MachineName = "jum-nbu-5230a"
        FQName = "JUM-NBU-5230A.DXB.JI.NET"
        LocalDriveSeed = ""
        MachineDescription = ""
        MachineFlags = 0x77
        MachineNbuType = media (1)
        MachineState = active for tape and disk jobs (14)
        MasterServerName = "JUM-BKUP-05"
        NetBackupVersion = 7.6.0.2 (760200)
        OperatingSystem = linux (16)
        ScanAbility = 5
jum-bkup-04
        ClusterName = ""
        MachineName = "jum-bkup-04"
        FQName = "jum-bkup-04.DXB.JI.NET"
        LocalDriveSeed = ""
        MachineDescription = ""
        MachineFlags = 0x17
        MachineNbuType = media (1)
        MachineState = active for tape and disk jobs (14)
        MasterServerName = "JUM-BKUP-05"
        NetBackupVersion = 7.5.0.6 (750600)
        OperatingSystem = windows (11)
        ScanAbility = 5
Command completed successfully.
JUM-NBU-5230B:/home/maintenance #

=========================================================================

Attaching the patch update logs... Support has not been helpful and still digging logs.

Please help.

Hi all,

I have a 5230 Linux appliance and a Windows 2008 R2 media server with 3 ML6000 tape libraries attached.  Our current infrastructure only allows me 1 GB ethernet from the 5230 to the Medai Server and obviously giving me poor throughput.  Have searched and searched to find out how to set this up, so here I am.

I would like to use FT directly from the 5230 to the Media Server.  The 5230 has the HBA ports and just installed one in my Media Server also. I would like to pass all of my traffic going to tape through FT.  Is this an option for me?   Any input would be most appreciated, our organization is just getting started with this solution so we are not very experienced as of yet.

Thanks in advance...

Trying to upgrade a NB5220 v2.5.2 master server to v2.6.0.1 (which is actually in VMware Fusion 6 on a Mac) and I get this:

Any ideas how to fudge is past this check ?

Thanks.  D.

As the 52xx Appliances do not support iSCSI attach I am just wondering what is seen as best practice for securing VMware data when the datastores reside on an iSCSI attached SAN.

I guess there are two options:

1. Create 1 or more VMware Proxy Backup Servers (Hot-Add) within the ESX environment

2. Install 1 or more physical Proxy Backup Servers (Hot-Add) which have an iSCSI connection to the SAN

Are there any more preferable ways to do this, or if not which of the above is best in terms of functionality and performance ?

Thanks,

AJ.

So I skipped 7.6.0.1 for my appliances.  But my 7.6.0.2 test bed won't let me upgrade my java client from the 7.5.5 version direct to 7.6.0.2.  So it seems I need a copy of the 7.6.0.1 version first.  

You link it first, you get a solution check.  

Cheer

Sully

So I've gone to 2.6.0.2 now that Heartbleed has been addressed.  Why has root been taken away?  I know how to get it back but taking away root is like selling me a car then not letting me drive it.  As a former UNIX admin, I only run NBU on UNIX platforms and I am ALWAYS super-user.

Hi all,

Is there any method to check the appliance storage shelf's serial number remotely? 

Inside the web conosle I cannot find any information related to the serial number of the storage shelf!

Thanks a lot!

Hello Everyone.

I need help about restore shared folder/files include permissions. 

After restore my folder/files permissions is restored, but shared folder is not shown.

Client =  VMware Win2K3 + NBU client agent 7.6.0.1 

Master Server = Appiance 5230 V.7.6.0.1

Backup policy type = VMware 

Restore type = Normal (Select specified of shared folder/files)

Hi All,

I currently backup lots of VMs with no problems. 

We also backup the Virtual Center SQL databases as well using transaction log backups every two hours and then an incremental daily. The strange thing, is that we have been seeing that straight after the incremental backup, we see that the VIM database in VC complains that the transaction log is full up. 

The last transaction log backup happens at midnight so the transaction log should be pretty much empty. 

My questions are:

What effect does a differential backup have on the VIM database logs? Does anyone have any experience of this?

Is there something you can add to the SQL scripts that would force a transaction log truncate before the differential backup starts?

I have checked that admin guide and best practice but cant really see any reference to this issue.

Hi all,

Did anyone manage to successfully configure the SAN multi-path to your SAN storage array through the DMP setup on the appliance 5220 v2.6.0.2?

I have an existing case with support and still waiting for backline to assist.

If anyone manages to configure this successfully, can you share with me the relevant documents for me to read up?

Our array is running on active-active mode with ALUA enabled.

However, the appliance now still only detect a primary path with no load balancing and redundacy configured.

Regards,

Li Xi

Hello Team,

We have Symantec pure disk  appliance (5220) as netbackup master server.

Netbackup server is not geeting connected to the opscentre, 

Could you please let me know what action needs to taken So that ops centre & netbackup server will be connected.

Let me know if you need any more information.

Dear Experts

we have setup netbackup appliance 5220 setup with replication 

version 2.5.2 

we want to install a tape library of hp auto loader

HP MSL2024 1 LTO-5 Ultrium 3000 FC TP Library

i should be through Iscsi connection or Fibre direct connectivity ,though i have to do zonning 

Hi All,

We recently upgraded on of our appliance from 2.5.3 to 2.6.0.2. It was a direct upgrade to 2.6.0.2 version. Since the upgrade backups are failing with error 24 and 14 mainly socket errors and we can see winsock error 10060 in bpbkar.

The interesting thing is if we move the backups to the appliance which is not yet upgraded to 2.6.0.2 and is still at 2.5.3 level, the backup goes on fine.

We have opened a case with Symantec and are still struggling for more than a week.

Anyone of you had similar issues after upgrade. Kindly share and advise.

Has anyone ever used Tier 3 Huntsman Audit with Netbackup and Appliances. Would you be able to share your experiences.

What we are looking for is the ability to audit log certain operations within Netbackup. These would include when someone initiates a manual restore or removes a tape from a media pool.

Where would these events get logged anyway? Could I easily redirect them?

Hi All

I have a problem.

i make a full backup of a xenserver vm with BMR collection activated.

My backup is successfully ending and no errors appears to collect of bmr data.

I make my SRT, i build my iso to boot on client.

when i start a client on iso , GUI is charged succcesfully but when i want launch restore operation, a popup is done : failed to retrieve any configurations from the server

i have copied mu original config to a new config nammed bmr and i have changed mac address of network card.

ping is ok between netbackup console ti client, appliance to client but i 'm unable to restore my machine.

Any idea please help me

Olivier

Hello

I have two appliances A & B

i want copy backup images from appliance A to appliance B.

Is there anyway to do a factory reset on an appliance upgraded to 2.6.0.1?

I see from the page below that its not.

http://www.symantec.com/business/support/index?pag...

Hi All,

Can anyone tell me where the commands are for the the SMASH console on the 5230 appliance. For some reason, after a reimage, I have rebooted the appliance but do not get even the spash screen. I can get onto the IPMI port and know there is a way of booting the appliance from there.

Kind Regards,

Leo.

HI ALL

The master/ft media server  is nbu appliance5230, The nbu version is 7.5.0.7.   nbu client is hp-unix 11.31 ia64. 

On hp-unix Client , I run bpclntcmd –sanclient 1  and reboot the hp-unix server,but i cannot backup files use san ,stil use lan .

Job Detail:

2014-6-24 1:00:00 - Info nbjm (pid=12471) starting backup job (jobid=84) for client hisdb2, policy test, schedule diff
2014-6-24 1:00:00 - Info nbjm (pid=12471) requesting STANDARD_RESOURCE resources from RB for backup job (jobid=84, request id:{D007B252-FAF7-11E3-B342-34CDFA4DA886})
2014-6-24 1:00:00 - requesting resource stu_disk_nb5230
2014-6-24 1:00:00 - requesting resource nb5230.NBU_CLIENT.MAXJOBS.hisdb2
2014-6-24 1:00:00 - requesting resource nb5230.NBU_POLICY.MAXJOBS.test
2014-6-24 1:00:00 - awaiting resource stu_disk_nb5230. FT client has no devices configured.
2014-6-24 1:00:00 - granted resource  nb5230.NBU_CLIENT.MAXJOBS.hisdb2
2014-6-24 1:00:00 - granted resource  nb5230.NBU_POLICY.MAXJOBS.test
2014-6-24 1:00:00 - granted resource  MediaID=@aaaac;DiskVolume=PureDiskVolume;DiskPool=dp_disk_nb5230;Path=PureDiskVolume;StorageServer=nb5230;MediaServer=nb5230
2014-6-24 1:00:00 - granted resource  stu_disk_nb5230
2014-6-24 1:00:00 - estimated 38 kbytes needed
2014-6-24 1:00:00 - Info nbjm (pid=12471) started backup (backupid=hisdb2_1403542800) job for client hisdb2, policy test, schedule diff on storage unit stu_disk_nb5230
2014-6-24 1:00:01 - Info bpbrm (pid=31504) hisdb2 is the host to backup data from
2014-6-24 1:00:01 - Info bpbrm (pid=31504) reading file list from client
2014-6-24 1:00:01 - Info bpbrm (pid=31504) starting bpbkar on client
2014-6-24 1:00:01 - started process bpbrm (pid=31504)
2014-6-24 1:00:01 - connecting
2014-6-24 1:00:01 - connected; connect time: 0:00:00
2014-6-24 1:00:02 - Info bpbkar (pid=23540) Backup started
2014-6-24 1:00:02 - Info bpbrm (pid=31504) bptm pid: 31557
2014-6-24 1:00:02 - Info bptm (pid=31557) start
2014-6-24 1:00:02 - Info bptm (pid=31557) using 262144 data buffer size
2014-6-24 1:00:02 - Info bptm (pid=31557) using 30 data buffers
2014-6-24 1:00:03 - Info bptm (pid=31557) start backup
2014-6-24 1:00:03 - Info bptm (pid=31557) backup child process is pid 31569
2014-6-24 1:00:03 - Info bptm (pid=31557) waited for full buffer 1 times, delayed 1 times
2014-6-24 1:00:03 - begin writing
2014-6-24 1:00:04 - Info bptm (pid=31557) EXITING with status 0 <----------
2014-6-24 1:00:04 - Info nb5230 (pid=31557) StorageServer=PureDisk:nb5230; Report=PDDO Stats for (nb5230): scanned: 34 KB, CR sent: 0 KB, CR sent over FC: 0 KB, dedup: 100.0%
2014-6-24 1:00:04 - Info bpbrm (pid=31504) validating image for client hisdb2
2014-6-24 1:00:04 - Info bpbkar (pid=23540) done. status: 0: the requested operation was successfully completed
2014-6-24 1:00:04 - end writing; write time: 0:00:01
the requested operation was successfully completed  (0)

The nbftconfig

nb5230:/usr/openv/netbackup/bin/admincmd # ./nbftconfig -listclients -verbose
SAN Client Name      : hisdb2
SAN Client Version   : 7.5
SAN Client State     : active
Master Server Name   : nb5230
FT Server Connections: 0
Client Ports/Server  : 2
Usage Preference     : preferred
Backup Wait Time     : 15
Restore Wait Time    : 5
 
nb5230:/usr/openv/netbackup/bin/admincmd # ./nbftconfig -listtargets -verbose
FT Server Name   : nb5230
 
FT Server HBA Port   : 0
FT Server Port WWN   : 21:00:00:24:FF:36:A1:0A
FT Server Port Mode  : FABRIC
FT Server Port Model : QLE256x Series FC Hba
FT Server Port Vendor: Qlogic
        FT Server Device State   : active
        Associated LUN           : 0
        Active Connections on LUN: 0
 
        FT Server Device State   : active
        Associated LUN           : 1
        Active Connections on LUN: 0
 
FT Server HBA Port   : 1
FT Server Port WWN   : 21:00:00:24:FF:36:A0:E6
FT Server Port Mode  : DISCONNECTED
FT Server Port Model : QLE256x Series FC Hba
FT Server Port Vendor: Qlogic
        FT Server Device State   : active
        Associated LUN           : 0
        Active Connections on LUN: 0
 
        FT Server Device State   : active
        Associated LUN           : 1
        Active Connections on LUN: 0
 
nb5230:/usr/openv/netbackup/bin/admincmd # ./nbftconfig -lc -verbose
SAN Client Name      : hisdb2
SAN Client Version   : 7.5
SAN Client State     : active
Master Server Name   : nb5230
FT Server Connections: 0
Client Ports/Server  : 2
Usage Preference     : preferred
Backup Wait Time     : 15
Restore Wait Time    : 5

Ioscan

hisdb2#[/]ioscan -fnC tape
Class     I  H/W Path  Driver S/W State   H/W Type     Description
==================================================================
tape      7  0/2/1/0.2.12.255.0.0.0  stape   CLAIMED     DEVICE       ARCHIVE Python
                      /dev/rmt/7m             /dev/rmt/c26t0d0BEST   
                      /dev/rmt/7mb            /dev/rmt/c26t0d0BESTb  
                      /dev/rmt/7mn            /dev/rmt/c26t0d0BESTn  
                      /dev/rmt/7mnb           /dev/rmt/c26t0d0BESTnb
tape      8  0/2/1/0.2.12.255.0.0.1  stape   CLAIMED     DEVICE       ARCHIVE Python
                      /dev/rmt/8m             /dev/rmt/c26t0d1BEST   
                      /dev/rmt/8mb            /dev/rmt/c26t0d1BESTb  
                      /dev/rmt/8mn            /dev/rmt/c26t0d1BESTn  
                      /dev/rmt/8mnb           /dev/rmt/c26t0d1BESTnb

So what can i do ???

Hi,

I'm setting up a new appliance...straight out of the box.

I put in IP address, DNS, gateway, SMTP and email address details...then my browser hang.

On restart, I can't log into the appliance at all.

I get the error 'Login failed. Please contact your System Administrator.'

My set up is that I've connected my laptop to the appliance.

I've tried using different browsers, cleared cache, etc....still giving me the same error.

Please help.