Safeguarding an appliance.
I need a solution Hi All,What is the best procedure for safeguarding an appliance? I realize that the internal boot disk uses a RAID configuration but what is the best way to safeguard against someone...
View ArticleTape Drive Throughput
I need a solution Running Netbackup 7.5.6 on a 5220, I have LTO6 Tape Drives, Is there a way to figure out what throughput I'm getting with my tape drives when backing up to them? 1403781695
View ArticleRe-IP of a currently working master/media appliance?
I need a solution Hi,NB5230 + 1 disk shelf, v2.5.3 aka v7.5.0.2, master/media, adv. disk and MSDP - no other attached storage.The master/media appliance that I want to re-IP does not perform any...
View Article“Maximum I/O streams per volume” with Disk Pools
I need a solution where is the setting for e “Maximum I/O streams per volume” with Disk Pools in Netbackup? Pat
View ArticleSystem partition low on space
I need a solution Hi all,I have an appliance 5220, which is alerting me that the system partition(?) is running low on space and only has 16% free space availableI've had a look around and it seems...
View ArticleVmWare vSphere 5.1 Sicherung mit NetBackup 7.6.0.2
I need a solution Hallo,Seit ich unsere komplette NetBackup Domäne auf 7.6.0.2 gehoben habe.habe ich bei manchen vmWare Guests (Servern) ein problem (5 Server von 120): bei manchen Server ist...
View ArticleWhat are the command options for nbfdrv64,when using san-clients?
I need a solution After san-client is enabled on NBU5220, NBU5220 works as a FT media sever, we can see the FT processes as below:nbu52201:/ # bpps -x|grep nbf root 13016 1 0 21:22 ?...
View ArticleNotification that /dev/mapper/system-log is at 89% full
I need a solution We upgraded our appliance from 7.5.0.6 to 7.6.0.2 last week and now we are getting an alert from the appliance that /dev/mapper/system-log is at 89% full. Any ideas on how to fix this?
View ArticleWhen too much process on appliance, randomly some of database backup fails at...
I need a solution Hello,Firstly, this is a big company, nearly 20-25 TB data is backedup as weekly full backup. I think the problem occurs when i have duplication and backup processes at the same...
View ArticleCompelling reason not to include eth0 in bond0 on NB5230 v2.6.0.1?
I need a solution Hi,Is anyone aware of a compelling reason why we should not include eth0 in an 802.3ad bond0 (of 4 x 1Gb eth0/1/2/3) on an NB5230 master/media running v2.6.0.1?Is it officially...
View ArticleNetBackup KMS when appliance is master/media?
I need a solution Hi,Master/media NB5230 v2.6.0.1, and FC to LTO6 drives in HP MSL 2024.I know how to setup and configure NetBackup KMS. At this point in time I'm not interested in MSEO.The Appliance...
View ArticleNetbackup Appliance 5230 - 2.6.0.1 - Dropped Packets
I need a solution Run a command tcpdump on appliance about 20 seconds842 packets captured129197 packets received by filter115211 packets dropped by kernel very, very packets droppedsany idea?
View ArticleHow to add Windows Client packages to fresh NB5220 v2.6.0.1?
I need a solution Have just installed a virtual NB5220 from v2.6.0.1 ISO. Configured as master. All seems ok.Opened browser to WebAdmin GUI, but Windows client kit is not available for download from...
View ArticleIs it correct to infer that Appliance v2.6.0.2 no longer supports vSphere ESX...
I need a solution Just sharing something that a partner pointed out to me the other day, which I did add it as a potential answer to question in the main forum - but I think it's worth re-iterating...
View ArticleDuplication to tape slow
I need a solution Running a 5220 with 7.5.0.6. I'm using SLP's to replictate to a Master appliance at our DR site and to duplicate to tape, going to IBM.ULTRIUM-TD6 tape drives. Starting last week my...
View ArticleUsing the 5230 Migration Utility to migrate PureDisk data to MSDP
I need a solution Hi all, Need to migrate data off a legacy PureDisk system into 5230 and I need some clarification on the process.HOWTO89017 states "NetBackup cannot use the storage hardware while...
View ArticleAIR behavior with Bandwidth Throttle in place
I need a solution I have a setup with AIR on two different 5220 Appliances. The network between the two locations is only 100Mb for everything. Netbackup replication wants the full pipe but the...
View Articlesyslog redirection from NBU appliance
I need a solution Hi All,Has anyone ever redirected syslog to an external collecter on Netbackup Appliances. I have seen that in the /etc/sysconfig/syslog.conf file that you can put in an external IP...
View ArticleClik here to view.
Huge buffer delays
I need a solution Hello I've been reading up on a few similar cases like https://www-secure.symantec.com/connect/forums/slow-backups-after-upgrading-7503 and...
View ArticleMismatch in SLP information
I need a solution The activity monitor and Ops Center Analytics are in agreement that all SLP's have completed all processing. This data center and their remote data center are using Air between two...
View Article